fbpx tag:

Ground Improvement – Queensland

Slab Jacking, Void Filling And Ground Improvement


Waterstop Solutions uses cutting-edge mining technology to provide ground improvement services such as slab jacking and void filling.  Our services are currently offered on the East Coast of Australia in Queensland and New South Wales, with offices located in Brisbane and Sydney.

Service areas in QLD: Greater Brisbane Area, Gold Coast, Sunshine Coast and more, with our Brisbane office located in Brendale in the Moreton Bay Region.


We apply our moisture reactive polyurethane technology under sunken concrete to lift, re-level and stabilise it, to deliver a permanent solution.  Subsiding slabs and footings, and other such issues, can be remedied with this technology.


This expanding polyurethane (PU) resin injection technology is primarily used for slab jacking.  It raises, corrects and strengthens moving and sunken concrete structures on, or in, the ground.


With minimal interruption to traffic, our structural expanding PU resin can re-level sunken slabs and re-support moving slabs quickly, accurately and economically in:


  • Driveways
  • Car parks
  • Garages
  • Hardstand areas
  • Loading docks
  • Warehouse distribution centres
  • Airports


Our resin injection method allows even the heaviest vehicles, such as forklifts, trucks, buses and airplanes, to run smoothly over the treated area within minutes after the job has been completed.

Polyurethane is injected underneath existing concrete. It is fast-acting – expanding up to 30 times its volume within seconds. The controlled placement of materials ensures that the ground in the treated area is “glued” together, stabilising against future erosion in the immediate location.

Because the polyurethane can be open-celled and permeable, this system will allow water to slowly seep through, if an application so requires, preventing pore pressure build-up and reducing possible future erosion adjacent to the treated area.

In cases such as sinkholes, we may reinforce the polyurethane (PU) system with aggregate for added compressive strength and continuous ground support.


During construction, ground instability can cause soil slippage which often requires stabilisation works prior to conducting additional excavation for building foundations or building retaining walls. Once a building is already in place, ground instability can cause movement of the building or structure, resulting in internal or external wall cracks, excessive control joint movement, sunken floors and more.


Ground instability can happen naturally and it can be exacerbated by issues such as soil compaction, erosion or excessive excavation. Without soil stabilisation in the case of erosion being a contributing factor, it will lead to further erosion and damage to structures such as; further deterioration in building elements, embankment slippage on industrial sites and the ability for wall cracks to reappear.


At Waterstop Solutions, we are expert in ground improvement in Queensland and New South Wales. We have access to the latest technologies from the tunnelling and mining industry and work closely with the specialist engineers and the CSIRO to provide our clients with a rock-solid outcome.


Contact Waterstop Solutions today for all your expert Slab Jacking, Ground Improvement and Void Filling needs in Brisbane, Gold Coast, Sunshine Coast and outlying areas in the Queensland region!

Contact Us

Error: Contact form not found.

Contact Us