fbpx tag:
 

Warehouse concrete slab and joint edge repair

broken concrete slab surface repair completed Waterstop Solutions

Warehouse concrete slab and joint edge repair



 

Waterstop Solutions’ specialist technicians have completed several concrete and joint edge repairs recently. These photos show an example of a repair of a broken concrete surface at a large warehouse in QLD – A solution that delivers a high-strength concrete repair with an even surface and excellent bearing capacity. 𝗔 𝗴𝗿𝗲𝗮𝘁 𝗼𝘂𝘁𝗰𝗼𝗺𝗲 𝗳𝗼𝗿 𝗼𝘂𝗿 𝗰𝗹𝗶𝗲𝗻𝘁!

◾️  The best surface for safe and efficient movement of goods is a smooth, hard and uninterrupted surface.

◾️  Unsound concrete is removed.

◾️  Improved productivity of material handling and traffic efficiency.

◾️  Vehicles can move at speed without slowing down to manoeuvre over separated joints.

◾️  Reduced vehicle repair costs and downtime due to wheel replacement.

◾️  Time and Cost-Effective Solution – If left untreated, the defect grows wider and deeper and will eventually require expensive and time-consuming repairs.

The typical method used by  Waterstop Solutions in joint rehabilitation is as follows:


◾️    Repairs are square-cut into the concrete to prevent feather-edge cracking and to maximise durability.

◾️    Polymer repairs are used for rapid setting and higher impact resistance.

◾️    Once set, we normally grind repairs to ensure an extremely smooth transition.

◾️    Joints are re-cut and re-sealed to protect them from further damage.

◾️    Re-sealed joints are primed if the substrate is porous, which can double the life of the seal.

◾️    Appropriate joint sealant system for the application is selected and installed.

◾️    Joint Reduction – Wide joints suffer the most damage and any difference in level between the floor slabs will exacerbate the problem. Reducing the width of expansion joints to 10mm will help lower the impact of hard wheel traffic and minimise the chance of wheels getting caught in the joint.
Waterstop Solutions provides concrete slab surface and joint edge repairs as one of many remedial services we offer – We typically provide ground improvements at distributions centres, industrial warehouses, hardstands and civil infrastructure in QLD and NSW. For this particular site, we were engaged to fill the void beside a newly fixed stormwater pipe situated underneath a concrete slab. Heavy vehicles are accessing this area for deliveries, so the void requires a filling that that provides the structural strength that can withstand heavy vehicular traffic over the filled void without collapsing.
You can view our Capability Statement here: https://waterstopsolutions.com.au/capability-statement/

 

Give Waterstop Solutions a call today if you need assistance and repairs done. We can help with inspection, provide you with tailored solutions and even help with the prioritisation of remedial works such as leak sealing, waterproof membrane refurbishment and concrete defect repairs for multistory buildings, commercial, industrial and civil sites.

Waterstop Solutions’ inspectors are equipped with extensive industry knowledge and the latest in non-invasive inspection technologies.  Our thorough site assessment and diagnosis process provides our clients with industry-leading, expert advice. Following an inspection, our specialist staff formulate a free, comprehensive quotation including recommendations tailored to the assessed concerns, which is then emailed to you in a timely manner.

In addition to our regular inspection service, we can provide audits of multi-story concrete buildings. The audit consists of a defect information list of items classed in priorities from P1 to P4, and their repair types. Ask us about how to secure a booking for this additional service.

 

Give us a call to discuss the best protective treatment application for your vertical and horizontal surfaces to help you choose the appropriate product and methods to protect them and how to best prepare the surface before installation for best performance.

If you have any issues with water ingress, rooftop leaks, leaking balcony, leaking basement, wet lift pit, cracking concrete slabs, structural cracks, concrete deterioration, spalling concrete, concrete cancer, deteriorated joints, moisture, seepage, efflorescence, rising damp and/or high-flow active leaks in concrete structures, we would be happy to assist you. You are welcome to contact us with any questions that you may have.

 

Brisbane office: (07) 3205 1899   

Email: 

Sydney office: (02) 9346 8308   

Email: [email protected]

 


Are you interested in finding out more about the various remedial building services we are providing?

Please click on the image below to download Waterstop Solutions Capability Statement

Waterstop Solutions Capability Statement

Waterstop Solutions Capability Statement is now available to download as PDF. (The image is clickable and opens up a link to our Capability Statement). 

 

 


 

Good maintenance begins with a proactive approach to maintain, keep, preserve and protect a building. 

Remember that seepage/water ingress into areas such as balconies, basements, concrete roofs, car parks and retaining walls, should not be ignored – call a remedial waterproofing professional today for an assessment to provide you with the best solution for your situation.

At Waterstop Solutions, we carry out a wide range of remedial works to concrete structures post-construction stage in Brisbane, Gold Coast, Sunshine Coast, Sydney and outlying areas in Queensland and New South Wales.

Equipped with major civil works experience, we can quickly determine the best approach to rectify all seepage and concrete deterioration issues.

 


It takes licenced remedial waterproofer and leak sealing experts like us at Waterstop Solutions to ensure that the pathways for water to ingress are properly sealed off. A depth of technical knowledge and experience, along with a proud reputation for integrity and reliability, has made Waterstop Solutions the go-to company for many Defect Managers working for major construction companies across Queensland and New South Wales.

We at Waterstop Solutions have the technical and practical expertise to diagnose the source of the leak and will provide you with our recommended solution to achieving an effective, high-quality, long-lasting repair to stop the water ingress with minimal disruption

We believe in and are committed to always delivering high-quality solutions by utilising the right products and techniques for each specific project combined with our industry-leading know-how on tap. We have a large talent pool of specialist leak sealing and concrete repair technicians with Certificate III in construction waterproofing in Queensland and New South Wales that are extensively trained in our systems and project execution methods.

The leadership positions on every Waterstop Solutions project are operated by highly qualified, certified and experienced industry professionals. Our in-house skills and expertise gained from more than 60 years of industry experience provide a full range of high-quality remedial waterproofing and concrete repair works to commercial buildings, civil infrastructures, industrial sites and residential properties. From waterproofing diagnostics, preventative and remediation solutions – All of our waterproofing solutions are quality guaranteed.

 



Contact Us